The Spiral Stair Experts, every handcrafted one-piece, welded spiral staircase we manufacture is available in steel or aluminum.
Spiral Stair Experts -  Innovative Metal Craft
Innovative Metal Craft, llc
4201 Bell Street
Erie, PA 16511
814-898-3700 Phone
814-899-9139 Fax
sales@spiralstairsofamerica.com

We Are The Spiral Stair Experts.
 
Home           Company Info           Contact Us    
FREE DESIGN ASSISTANCE!

814-898-3700
   spiral stair building codes  powder coating colors
Information • Photo Gallery Authorized Only
Spiral Stair Building Code Information

Innovative Metal Craft’s spiral stair and railing designs will meet compliancy with each of the requirements that are listed below. This information will apply to the BOCA Code, UBC Code, IRC Code, and IFC codes.

  • Minimum clear walking path of 26 inches. A 5-foot diameter or larger stair will provide this width.
  • The tread rise shall not be more than 9 1/2 inches high.
  • Each tread will have a minimum tread depth of 7 1/2 inch at 12 inches from the narrow edge.
  • Stair balusters shall be spaced so a 4-inch object cannot pass between. The IRC 2003 & 2006 permits a 4 3/8 inch space.
  • All treads will be identical.
  • Landing width shall not be less than the required width of the stairway. Minimum spiral stair tread width is 26 inches.
  • Minimum headroom of 6 foot 6 inches shall be provided, measuring plumb from the edge of the landing down to the tread below.
  • Balcony/Well Enclosure guardrail balusters shall be spaced so a 4-inch object cannot pass between. Balcony/Well Enclosure guardrail height shall not be less than 36 inches. (If your state or municipality requires 42-inch tall guardrails, the sales order must reflect this detail.)
  • The stairway shall be equipped with one handrail on the wide edge of the tread.
  • Handrail height, measured vertically from the tread nosing, shall be not less than 34 inches nor more than 38 inches.
  • Handrails with a circular cross section shall have an outside diameter of at least 1 1/4 inches and not greater than 2 inches. If the handrail is not circular, it shall have a perimeter dimension not greater than 6 1/4 inches. Handrails with a perimeter greater than 6 1/4 inches, shall provide a graspable finger recess area on both sides of the profile.
  • A 300 lb. concentrated load is required. Please see our detailed Blueprint/Standard Plan for more information.

*Innovative Metal Craft’s standard code package does not address the open space between each tread (open rise stair). *IRC Code or IFC Code requires not more than a 4" space in this area, you will need to order a riser bar or modified tread to meet requirements. Please contact a consultant for more information.

*Please check with your local building department for the exact requirements for your area.

 

       
Innovative Metal Craft llc - We Are The Spiral Stair Experts.  Call: 814-898-3700  Copyright IMC 2016